A catalog of popular RF interconnect and transmission-line parts — vias, coplanar waveguides, wire bonds, connectors and more. Open any component to sweep its geometry and pull the dataset that matches your stack-up.
Vertical PCB transition
Plated through-hole and micro-via transitions between layers. Sweep barrel, pad, anti-pad, plating and ground-return geometry to hit a target impedance and minimise stub resonance.
Single-ended surface trace
Controlled-impedance surface trace over a reference plane. Trade width, height, Dk, loss tangent, copper weight, roughness and length to land on 50 Ω with acceptable total loss.
Coplanar waveguide w/ ground
Grounded coplanar waveguide for mm-wave routing. Sweep signal width, ground gap, copper weight and roughness to control impedance and loss.
Buried symmetric line
Symmetric buried trace between two reference planes for tight, low-radiation routing. Balance width, plane spacing, offset and roughness for target impedance.
Die-to-package bond wire
Gold, aluminium or copper bond-wire transition from die to package. Inductance dominates at high frequency — sweep length, diameter, loop height and count to minimise it.
Coax-to-board launch
Board-launch coaxial connectors across the SMA / 2.92 / 2.4 / 1.85 mm families. Filter by series, launch style, gender and dielectric to find a part rated for your band.